Create a vlan - this can be done in the Unifi controller: Access your Unifi Controller. Create a new corporate network pay attention to the VLAN id you select for the network. Ensure that the DHCP Name Server is set to Manual. Enter the following addresses in: - DNS Server 1: 103.86.96.100. After connecting to the L2TP VPN server running on the USG/UDM and authenticating to the built-in RADIUS server, the remote VPN clients will be allowed to communicate with the devices on the LAN. GUI: Access the UniFi Controller Web Portal.
In my homelab setup I am using UniFi network components and I was looking for a secure way to connect to my environment when I am on the road. After doing some research on the technical implementations, I found that OpenVPN – at least in theory – offers the best security, performance and reliability compared to L2TP / IPSec and PPTP.
There are several guides how to configure this for a UniFi Security Gateway, however, I found that many of them are lacking important information or were wrong. I ‘trial ‘n error'd' through those guides until I found a setup which is working quite well for me.
Authentication requirements
As a prerequisite, you will need to enable the built in Radius Server on the USG. To do that, navigate to your UniFi Controller and navigate to Settings – Services. Enable the Radius Server from the menu and enter your secret key:
From the users tab, you can add your OpenVPN users. I recommend specifying a different VLAN for security reasons.
Tunnel type: 3 – Layer Two Tunneling Protocol (L2TP)
Tunnel medium type: 1 – IPv4 (IP version 4)
Since you should have entered two passwords after the first part already, I recommend you start using a password manager now if you do not use one already. Generating strong unique passwords and saving it using a proper password manager is essential – I recommend Bitwarden.
Set up easy-rsa and key generation
You need to connect to your USG using SSH. If you have not enabled SSH yet, you will need to activate advanced mode in your site settings:
The SSH login can also be configured in the site settings:
Now you can connect to your USG using SSH, I'm using Putty:
Download and install easy-rsa
Initialize the PKI and build the CA certificate and key
After you entered the ./build-ca command, you will be prompted for several parameters of which only the ‘Common Name' needs to be defined.
Generate a certificate and private key for the server
Give it a common name like 'OpenVPN CA'.
Confirm both prompts with yes:
‘Sign the certificate? [y/n]' and ‘1 out of 1 certificate requests certified, commit? [y/n]'
Generate Diffie Hellman parameters
Note that this process will take a long time to complete. In my case it took about 20 minutes.
You will end up with several files in the keys directory:
Copy the keys to the /config/auth/keys/ folder
Ubiquiti Dream Machine Pro Vpn
Configure OpenVPN on the USG
Note: In line 3, insert your own subnet and pick one which is not in use anywhere else on your USG. You might want to edit other options like DNS as well.
Configure your firewall so that it accepts OpenVPN connections on the WAN interface
Optionally configure the same rule for IPv6
Configure your USG to allow traffic from OpenVPN users to Internet
Create an .ovpn file
Paste the below into a new file, edit the hostname in line 5. Instead of the hostname you can also enter your WAN IP. I recommend using a hostname with dynamic DNS. With Namecheap for example, you can use an ‘A + Dynamic DNS Record'.
Then paste your certificate info in line 18. Copy it from /config/auth/keys/ca.crt.
Configuring OpenVPN to use Radius for authentication
Create a file /etc/pam_radius_auth.conf with your Radius server IP (USG IP) and the shared secret you used when enabled the Radius server. Use vi to edit the file to avoid formatting issues.
Create a file /etc/pam.d/openvpn with the following contents:
Make the changes persistent
Now you can test the connection, but the above changes are not persistent yet and will be lost once you reboot your USG or once you upgrade the firmware. So here is how we can make this configuration survive a reboot. Copy the previously created files into a new folder /config/scripts/ovpn_radius_config:
Copy the following content into a new file /config/scripts/postprovision.sh
Make the script executable:
Copy the following script to /config/scripts/post-config.d/postreboot.sh and make it executable as well:
Now you also need to edit your config.gateway.json file to make the above changes persistent or create this file if you do not use this yet.
Depending on which UniFi Controller you use, the file can be located in different folders. On a UniFi Cloud Key for example you can find the file here if you only have one site: /srv/unifi/data/sites/default/
In my case I had to create the folders /sites and /default because they did not exist yet.
Remember to edit your subnet in line 57 accordingly and also other changes from the above steps.
Also, if you want to merge the below file with your existing file, or you want to include other options and the settings are not applied correctly when booting your USG, there is a chance your json format is wrong. You can check your file here and get infos on how to fix syntax issues: https://jsonformatter.curiousconcept.com/
By default the vtun0 interface is not part of any other existing interface group (WAN, LAN, GUEST). That's why firewall rules do not apply and OpenVPN users can access any network on your USG. To mitigate that, I added lines 65 to 75. Of course you also need to add firewall rules, see below.
After placing the modified config.gateway.json file in the corresponding location, you may force provision your USG from the Controller to apply the settings:
Firewall rules
I want to allow my OpenVPN clients to access my homelab, but I want to block access to my other networks. First, define the network group in your firewall settings. Also, depending on your setup you can create further network combinations here for the other rules (see my examples below):
Then create the LAN IN rules. As you can see I will allow access to my homelab network, but I will drop any connection attempt to a network group called ‘OpenVPN Block' with my private network devices. If you want to use Internet, make sure not to block your WAN network.
Allow rule (exceptions):
The drop rule will discard any traffic from the OpenVPN network to your list of defined networks:
Last but not least, you will need to create the following LAN OUT rule, to make sure to receive outgoing packets.
You only need to allow established and related states:
Daz studio to maya. Daz offers File Formats ready for your preferred program, and Bridges to import from Daz Studio directly into Maya, Blender, Cinema 4D, 3ds Max, Unreal & Unity. LEARN MORE Photo-Realistic Renders. Daz Studio is a 3D art creation software platform that enables you to make dynamic renders, animations and creations with the help of a huge library of content that's always growing. Powerful, functional, and free, Daz Studio is used by beginners and professionals alike to create stunning, rich, and high-definition 3D art.
Final connection test
Now it's time to test the connection:
Nord Vpn Unifi
As you can see, the connection works as intended! 😊
If there any questions or issues you experience, do not hesitate writing a comment or contacting me.
Vpn Ubiquiti Usg
